Lifetime Connectivity

SFPP-32G-100m-850
Hybriflex SFP+ Modul 32G 100m

Rev : A | Rev date : 09 Feb 2026

SFP + Transceiver.

Features / Benefits

  • Supports 28.05Gb/s bit rate
  • 850nm VCSEL laser and PIN photo-detector
  • Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
  • Digital diagnostics functions are available via the I2C interface
  • Operating case temperature Commercial: 0°C to +70 °C
  • +3.3V single power supply
  • Power consumption less than 1W
  • RoHS compliant
  • Password protection for A0h and A2h
sfpp pic1 1310nm 10km.jpg
Absolute Maximum Ratings
Parameter Symbol Min Typ Max Unit Notes
Storage Temperature Ts -40 - 85 °C -
Operating Humidity RH +5 - +85 % No condensation
Supply Voltage Vcc -0.5 - 3.6 V -
Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit Notes
Operating Temperature Tc 0 - 70 °C -
Power Supply Voltage Vcc 3.14 3.3 3.47 V -
Power Supply Current Icc - - 300 mA -
Power Dissipation Pd - - 1.0 W -
Bit Rate BR 8.5 - 28.05 Gbps -
Transmitter Optical Characteristics
Parameter Symbol Minimum Typical Maximum Unit Notes
Bit Rate BR 8.5 - 28.05 Gbps Set low of RS0/RS1 pin and 0 of RS0/RS1 bit. Engine CDR lock at low bit rate. Set high of RS0/RS1 pin and 0 of RS0/RS1 bit. Engine CDR lock at high bit rate.
Center Wavelength Range λC 840 850 860 nm -
Spectral Width (RMS) Δλ - - 0.57 nm -
Average Launch power Tx_off Poff - - -30 dBm -
Average Optical Power Po -6.2 - - dBm Coupled into 50/125 MMF.
Extinction Ratio ER 2.0 - - dB -
Optical return loss tolerance ORL - - 12 dB -
Optical Eye Mask - 5 - - % -
Receiver Optical Characteristics
Parameter Symbol Minimum Typical Maximum Unit Notes
Bit Rate - 8.5 - 28.05 Gbps Set low of RS0/RS1 pin and 0 of RS0/RS1 bit. Engine CDR lock at low bit rate. Set high of RS0/RS1 pin and 0 of RS0/RS1 bit. Engine CDR lock at high bit rate.
Center Wavelength λ C 770 - 860 nm -
Damage Threshold DT 3.4 - - dBm -
Overload Input Optical Power PIN 2.4 - - dBm -
Receiver Sensitivity (Average Power) - - - -10.2 dBm BER=1x10-6; PRBS 231-1 @28.05Gbps.
Receiver Sensitivity (Average Power) - - - -5.2 dBm BER=1x10-12; PRBS231-1@28.05Gbps.
Optical Return Loss ORL 12 - - dB -
LOS Assert LOS-A -30 - - dBm -
LOS De-Assert LOS-D - - -13 dBm -
LOS Hysteresis LOS-H 0.5 - - dB -
Electrical Characteristics
Transmitter Parameter Symbol Minimum Typical Maximum Unit Notes
Differential Data Input Swing Vin,P-P 250 - 900 mVpp -
Input Differential Impedance Zin 90 100 110 Ω -
Tx_Fault Normal Operation VOL 0 - 0.4 V -
Tx_Fault Transmitter Fault VOH 2.4 - VCC V -
Tx_Disable Normal Operation VIL 0 - 0.8 V -
Tx_Disable Laser Disable VIH 2.0 - VCC+0.3 V -
Receiver Parameter Symbol Minimum Typical Maximum Unit Notes
Differential Date Output VOUT 400 - 800 mV -
Output Differential Impedance ZD 90 100 110 Ω -
Rx_LOS Normal Operation VOL 0 - 0.4 V -
Rx_LOS Lose Signal VOH 2.4 - VCC V -
PIN Description
PIN Name Function / Description Notes
1 VEET Module Transmitter Ground The module ground pins are isolated from the module case.
2 TX_FAULT Module Transmitter Fault The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on
3 TX DISABLE Transmitter Disable; Turns off transmitter laser output The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
4 SDA 2-Wire Serial Interface Data Line (MOD-DEF2) -
5 SCL 2-Wire Serial Interface Clock (MOD-DEF1) -
6 MOD_ABS Module Absent, connected to VEET or VEER in the module The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on
7 RS0 Rate Select 0 See SFF-8472 Rev12.2 Table 10-2.
8 RX_LOS Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as Signal Detect) The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on
9 RS1 Rate Select 1 See SFF-8472 Rev12.2 Table 10-2.
10 VEER Module Receiver Ground The module ground pins are isolated from the module case.
11 VEER Module Receiver Ground The module ground pins are isolated from the module case.
12 RD- Receiver Inverted Data Output -
13 RD+ Receiver Non-Inverted Data Output -
14 VEER Module Receiver Ground The module ground pins are isolated from the module case.
15 VCCR Module Receiver 3.3 V Supply -
16 VCCT Module Transmitter 3.3 V Supply -
17 VEET Module Transmitter Ground The module ground pins are isolated from the module case.
18 TD+ Transmitter Non-Inverted Data Input -
19 TD- Transmitter Inverted Data Input -
20 VEET Module Transmitter Ground The module ground pins are isolated from the module case.